User:Pgmurphy/WDS
Missing network driver
http://support.microsoft.com/kb/923834
Update the WDS boot image to include the new third-party network driver. To do this, follow these steps.
Note The following procedure assumes that the Windows Automated Installation Kit (AIK) is installed on the WDS server. If the Windows AIK is not installed on the WDS server, you can perform the same procedure on another computer that does have the Windows AIK installed. Then, map a network drive to the WDS server. a. On the WDS server, click Start, click Run, type wdsmgmt.msc, and then press OK. b. Under your WDS server, double-click Boot images. c. Right-click the boot image that you want, and then click Disable. d. Right-click the same boot image, click Properties, and then click General. e. Note the name and location of the boot image that is displayed in the File name box. f. At a command prompt, type the following: C:\program files\windows aik\tools\petools\copype.cmd x86 c:\windowspe-x86 Note Keep this command prompt window open for the next step. Imagex /info Drive:\remoteinstall\boot\x86\images\boot.wim Notes • Drive:\remoteinstall represents the path at which the Remoteinstall folder is installed. • Boot.wim is the name of the boot image. g. Note the boot index number of the bootable image that is displayed. To identify the boot index number, locate the line that contains "boot index: X."
Note X is the boot index number. The number indicates that image number X is marked as bootable and that the image is to be updated. h. At a command prompt, type the following: Imagex /mountrw Drive:\remoteinstall\boot\x86\images\boot.wim 2 mount peimg /inf:driver.inf mount\Windows \windows imagex /unmount /commit mount Notes • Drive:\remoteinstall represents the path at which the Remoteinstall folder is installed. • Driver.inf is the name of the third-party driver. • The Imagex /nountrw command mounts the specified image, with read/write permissions, to the specified directory. 4. Enable the boot image on the WDS server. To do this, follow these steps: a. On the WDS server, click Start, click Run, type wdsmgmt.msc, and then click OK. b. Under WDS server, double-click Boot images. c. Right-click the boot image that you want, and then click Enable.