Adding a Printer Through Server and Printer Name

The second way to add a printer still makes use of the Add Printer Wizard, but you will use a different option, and you must know the name of the printer you wish to use. Use this method if you are using a personal machine or if you are on the older ECEW2K domain. Due to minor differences between Windows XP and Vista, we have included a guide for both versions of this process.

Under Windows XP

Step 1 - Starting the Add Printer Wizard

To start the Add Printer wizard, click on the Start button, then click on Printers and Faxes. If Printers and Faxes is not available on the Start Menu, click on Control Panel, then on Printers and Faxes.

Figure 1 - Opening the Printer Wizard

Once this opens, click on "Add a Printer" in the upper-left, as shown in Figure 1. Click NEXT to proceed to the Local or Network Printer page. Choose the second option, "A network printer, or a printer attached to another computer", and hit NEXT to proceed to the next step.

Step 2 - Enter in the Print Server and Printer Name

You should now be looking at the Specify a Printer page. Make sure the second option, "Connect to this printer", is chosen and click in the blank. You must fill in this blank with the print server and the queue of the printer that you wish to use. The print server is eceprint.ece.ncsu.edu, and the queue is the name of the printer. Fill in the blank in the following format:

  \\eceprint.ece.ncsu.edu\<printer's name>

Figure 2 - Entering the Server and Printer Name

Figure 2 shows an example where we are connecting to the printer HIPPOGRIFF. As you can see, we have entered "\\eceprint.ece.ncsu.edu\hippogriff" in the blank. Once you have filled in the blank, click NEXT to proceed to the next step.

Step 3 - Authenticate to the Print Server

Your computer may take a moment to contact our print server, but eventually a login prompt should appear. You must authenticate with your WOLFTECH-domain login and password, which should be identical to your unityID and password. For questions about your WOLFTECH login and password, email ecehelp@ncsu.edu.

• If you are adding a printer from an ECEW2K-domained computer, enter your username as

  WOLFTECH\username

• If you are adding a printer from a personal machine, enter your username as

  wolftech.ad.ncsu.edu\username

Figure 3 - Entering Your Login Information

Figure 3 shows an example of the login prompt and how to enter your username and password. After you have entered your username and password, click OK and the computer will attempt to add the printer.

Step 4 - Finish the Wizard

If successful, the wizard will then ask if you wish to use this printer as your default printer. Choose either Yes or No, then click NEXT and you will come to the end of the wizard. Figure 4 below shows the summary screen of the Add Printer Wizard. Click FINISH to finish the wizard and the new printer will show up in the Printers and Faxes window and be available for printing in applications on your computer.

Under Windows Vista

Step 1 - Starting the Add Printer Wizard

To start the Add Printer wizard, click on the Start button, then click on Control Panel. When the Control Panel Window Opens up, click on Printers. Once this opens, click on "Add a Printer" on the bar right below the address bar, as shown in Figure 1.

Figure 1 - Opening the Printer Wizard

Choose the second option, "Add a network, wireless or Bluetooth printer", and hit NEXT to proceed to the next step. Figure 2 shows this step.

Figure 2 - Choosing to Add a Network Printer

Step 2 - Enter in the Print Server and Printer Name

You should now be looking at a window titled "Find a printer by name or TCP/IP address." Make sure the second option, "Select a shared printer by name", is chosen and click in the blank. You must fill in this blank with the print server and the name of the printer that you wish to use. The print server is eceprint.ece.ncsu.edu, and the name is the name of the printer. Fill in the blank in the following format:

  \\eceprint.ece.ncsu.edu\<printer's name>

Figure 3 - Entering the Server and Printer Name

Figure 2 shows an example where we are connecting to the printer HIPPOGRIFF. As you can see, we have entered "\\eceprint.ece.ncsu.edu\hippogriff" in the blank. Once you have filled in the blank, click NEXT to proceed to the next step.

Step 3 - Authenticate to the Print Server

Your computer may take a moment to contact our print server, but eventually a login prompt should appear. You must authenticate with your WOLFTECH-domain login and password, which should be identical to your unityID and password. For questions about your WOLFTECH login and password, email ecehelp@ncsu.edu.

• If you are adding a printer from an ECEW2K-domained computer, enter your username as

  WOLFTECH\username

• If you are adding a printer from a personal machine, enter your username as

  wolftech.ad.ncsu.edu\username

Figure 4 - Entering Your Login Information

Figure 3 shows an example of the login prompt and how to enter your username and password. After you have entered your username and password, click OK and the computer will attempt to add the printer. In the case that the Add Printer Wizard doesn't prompt you to enter a password, don't worry, this just means that your password has already been stored, possibly from a previous printer addition.

Step 4 - Finish the Wizard

If successful, the wizard will then ask if you wish to use this printer as your default printer. Choose either Yes or No, then click NEXT and you will come to the end of the wizard. Figure 4 below shows the summary screen of the Add Printer Wizard. Click FINISH to finish the wizard and the new printer will show up in the Printers and Faxes window and be available for printing in applications on your computer.