Difference between revisions of "Teaching Labs/1008 EB2"

From WolfTech
Jump to navigation Jump to search
 
(31 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
{{Teaching Labs}}__NOTOC__
 
{{Teaching Labs}}__NOTOC__
−
The '''Embedded Systems Lab''' is another lab full of equipment. There are ten computers, multimeters, and oscilloscopes for students to use, one at each workstation. Each workstation is large enough for two students to work together at, and there are two large tables in the center of the room for groups to work together at.
+
=Embedded Systems Lab=
−
 
 
−
The Embedded Systems Lab is used by ECE 306, Introduction to Embedded Systems, and ECE 561, Embedded System Design. Each class works with embedded systems, but on different levels of depth. ECE 306 introduces students to designing micro-controller based embedded computer systems. The lab sessions will give students experience implement the different designs discussed in class. There will be five different lab problems assigned that will require use of the embedded systems board. ECE 561 takes these concepts learned in 306 and expands on them. These students will design and make embedded computer systems that will be tested for power consumption, speed, and reliability. Effiecient development and testing will also be emphasized. Students will work through many of their problems using Renasas SDK in both classes.
 
−
 
 
−
==Lab Schedule==
 
−
 
 
−
To schedule this lab, email [mailto:ecehelp@ncsu.edu?Subject=EB21008-Lab-Reservation ecehelp@ncsu.edu].
 
−
 
 
−
==Equipment==
 
−
{|
 
−
| Model:
 
−
| Dell Dimension 4600
 
−
|-
 
−
| Processor:
 
−
| Pentium 4 2.8 GHz
 
−
|-
 
−
| RAM:
 
−
| 1024 MB
 
−
|-
 
−
| Operating System:
 
−
| Microsoft Windows XP Professional
 
−
|-
 
−
| Number of Computers:
 
−
| 12
 
−
|-
 
−
| Software:
 
−
| <pre>Symantec Antivirus 10
 
−
Wolfcall 1.2.1/AFS/Kerberos
 
−
PDF Factory Pro 2.40
 
−
Microsoft Office 2003 SP2
 
−
Microsoft Logoff Screensaver
 
−
Acrobat Reader 7.0.3
 
−
X-win32 6.1.1/PuTTy 0.55
 
−
Ultimate Zip 2.7.1
 
−
TecPlot 10
 
−
Project 2003 SP2
 
−
Visio 2003 SP2
 
−
GhostScript/GhostView 8.51
 
−
JDK 1.5.0.4
 
−
Macromedia Flash Player 8.0.22.0
 
−
Macromedia Shockwave Player 10.1.0.11
 
−
Quicktime Player 6.5.2
 
−
RealPlayer 10.5
 
−
WinSCP 3.71
 
−
Matlab 7.1
 
−
Condor Client (Run Only) 6.6.10
 
−
Renesas SDK </pre>
 
−
|-
 
−
| Equipment:
 
−
| <pre>12 Agilent 100 MHz 54622D Oscilloscopes
 
−
6 Keithley 169 Multimeters
 
−
3 Fluke 8000A Multimeters
 
−
3 Tektronix CFG250 Multimeter </pre>
 
−
|}
 
−
 
 
−
==Pictures==
 
−
<center>[[Image:1008-1.JPG|thumb|left]]
 
−
[[Image:1008-2.JPG|thumb|left]]
 
−
[[Image:1008-3.JPG|thumb|left]]</center>
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
  
 +
The '''Embedded Systems Lab''' contains a varied collection of equipment and also provides suitable space for students to work together and interact with their instructor.  The lab contains ten stations, each with its own computer station and instrumentation.  Two other stations provide space and tools for soldering and other hands-on activities, and the lab arrangement allows students and instructors to easily move among stations, allowing for communication and collaboration.  Multiple storage cabinets provide space to store equipment and materials for projects and classes.
  
 +
Classes in the Embedded Systems Lab typically involve working with embedded systems, which can be described as a varied group of special-purpose computer systems that can be programmed to perform one or a few specific functions.  Students work with micocontroller-based embedded systems and use software tools and suites to design, program, and test these systems.  Common tools and software include Renesas SDK and Sun Microsystems SunSPOTS.
  
  
 +
----
 +
====Lab Schedule====
 +
The schedule is subject to change at anytime, so check back often. To schedule this lab, email [mailto:ecehelp@ncsu.edu?Subject=EB21008-Lab-Reservation ecehelp@ncsu.edu].
  
 +
{{#tag:iframe|key="local"|path="calendar/u/0/embed?src=ncsu.edu_nogbt33lumu0p78h0egpbj3kd0@group.calendar.google.com&ctz=America/New_York"}}
 +
 +
----
  
 +
====Related Research Areas====
  
 +
* [http://www.ece.ncsu.edu/research/csp Communications and Signal Processing]
 +
* [http://www.ece.ncsu.edu/research/cas Computer Architecture and Systems]
 +
* [http://www.ece.ncsu.edu/research/net Networking]
 +
----
 +
====Course Information====
  
 +
* [http://www.ece.ncsu.edu/courses/class/453 CSC 453]
 +
* [http://www.ece.ncsu.edu/courses/class/306 ECE 306]
 +
* [http://www.ece.ncsu.edu/courses/class/402 ECE 402]
 +
* [http://www.ece.ncsu.edu/courses/class/561 ECE 561]
 +
* [http://www.ece.ncsu.edu/courses/class/775 ECE 775]
 +
----
  
  
 +
==Equipment==
 +
{| cellpadding="5"
 +
| '''Number of Computers''':
 +
:* 8
 +
|
 +
| '''Operating System''':
 +
:* Microsoft Windows 7 Enterprise
 +
|-
 +
| '''Model''':
 +
:* Dell Optiplex 980
 +
|
 +
| '''Processor''':
 +
:* Pentium Core i5 3.2 GHz
 +
|
 +
| '''RAM''':
 +
:* 8 GB
 +
|}
 +
{| cellpadding="5"
 +
| '''Software''':
 +
:* Adobe Acrobat Professional
 +
:* Matlab
 +
:* Microsoft Office
 +
:* OpenAFS/Kerberos
 +
:* Renesas SDK
 +
:* Saleae Logic Software
 +
:* Starnet X-win32
 +
:* Sun Java JRE
 +
:* WinSCP SFTP client
 +
|-
 +
| '''Instruments''':
 +
:* 10 Agilent 100 MHz 54622D Oscilloscopes
 +
:* 7 Agilent E3630A Power Supplies
 +
:* 5 Keithley 169 Multimeters
 +
:* 4 Fluke 8000A Multimeters
 +
:* 8 Fluke 8050A Multimeters
 +
:* 10 Saleae Logic Analyzers
 +
:* 1 Tektronix CFG250 Multimeter
 +
|}
  
 +
==Pictures==
 +
{|
 +
| [[Image:1008-01.JPG|thumb|Room view]]
 +
| [[Image:1008-02.JPG|thumb|Station view]]
 +
|}
 +
{|
 +
| [[Image:1008-03.JPG|thumb|Station equipment]]
 +
| [[Image:1008-04.JPG|thumb|Solder station]]
 +
|}
  
 
==Room Layout==
 
==Room Layout==
−
[[Image:1008EB2.gif]]
+
[[Image:1008EB2.jpg]]

Latest revision as of 09:54, 8 August 2022

Embedded Systems Lab

The Embedded Systems Lab contains a varied collection of equipment and also provides suitable space for students to work together and interact with their instructor. The lab contains ten stations, each with its own computer station and instrumentation. Two other stations provide space and tools for soldering and other hands-on activities, and the lab arrangement allows students and instructors to easily move among stations, allowing for communication and collaboration. Multiple storage cabinets provide space to store equipment and materials for projects and classes.

Classes in the Embedded Systems Lab typically involve working with embedded systems, which can be described as a varied group of special-purpose computer systems that can be programmed to perform one or a few specific functions. Students work with micocontroller-based embedded systems and use software tools and suites to design, program, and test these systems. Common tools and software include Renesas SDK and Sun Microsystems SunSPOTS.


Lab Schedule

The schedule is subject to change at anytime, so check back often. To schedule this lab, email ecehelp@ncsu.edu.

Related Research Areas

Course Information


Equipment

Number of Computers:
  • 8
 Operating System:
  • Microsoft Windows 7 Enterprise
Model:
  • Dell Optiplex 980
 Processor:
  • Pentium Core i5 3.2 GHz
 RAM:
  • 8 GB
Software:
  • Adobe Acrobat Professional
  • Matlab
  • Microsoft Office
  • OpenAFS/Kerberos
  • Renesas SDK
  • Saleae Logic Software
  • Starnet X-win32
  • Sun Java JRE
  • WinSCP SFTP client
Instruments:
  • 10 Agilent 100 MHz 54622D Oscilloscopes
  • 7 Agilent E3630A Power Supplies
  • 5 Keithley 169 Multimeters
  • 4 Fluke 8000A Multimeters
  • 8 Fluke 8050A Multimeters
  • 10 Saleae Logic Analyzers
  • 1 Tektronix CFG250 Multimeter

Pictures

Room view
Station view
Station equipment
Solder station

Room Layout

1008EB2.jpg

Retrieved from "https://tools.wolftech.ncsu.edu/support/index.php?title=Teaching_Labs/1008_EB2&oldid=10882"